Accessory

  • Milling
  • Drilling
  • Saws
  • Composites
  • 10.8056
    10.8056
    Protection cover for Angle Grinder
  • 11.1630
    11.1630
    Reduction rings, ground, knuried outward, H7 fit
  • 11.4947
    11.4947
    Plastic box blank for burr kit with 5 pieces
  • 20.1135
    20.1135
    Morse taper 2
  • 20.1135
    20.1135
    Morse taper 2
  • 20.1136
    20.1136
    Morse taper 3
  • 20.1136
    20.1136
    Morse taper 3
  • 20.1149
    20.1149
    Ejector pin
    6,34 x 90 mm
  • 20.1151
    20.1151
    Ejector pin
    7,98 x 90 mm
  • 20.1152
    20.1152
    Ejector pin 2-parts, 7,98 x 205 mm
  • 20.1154
    20.1154
    Ejector pin
    6,34 x 102 mm
  • 20.1160
    20.1160
    Ejector pin
    6,34 x 130 mm
  • 20.1161
    20.1161
    Adapter with bore 7,98mm:
    FEIN Quick-In 18mm -
    Weldon + Nitto/Universal 1 ...9mm (3/4")
  • 20.1163
    20.1163
    Adapter Fein Quick-In Max 32 mm 1./4"
  • 20.1163
    20.1163
    Adapter Fein Quick-In Max 32 mm 1./4"
  • 20.1221
    20.1221
    Ejector pin
    6,34 x 77 mm
  • 20.1226
    20.1226
    Ejector pin
    6,34 x 103 mm
  • 20.1232
    20.1232
    Ejector pin
    3,95 x 46 mm
  • 20.1233
    20.1233
    Ejector pin
    3,95 x 68 mm
  • 20.1234
    20.1234
    Adapter
  • 20.1235
    20.1235
    Shank
  • 20.1238
    20.1238
    Center punch
  • 20.1238
    20.1238
    Center punch
  • 20.1239
    20.1239
    Allen key
  • 20.1261
    20.1261
    Ejector pin
    6,34 x 77 mm
  • 20.1263
    20.1263
    Adapter with bore 6,34mm:
    FEIN Quick-In 18mm -
    Weldon + Nitto/Universal 1 ...9mm (3/4")
  • 20.1271
    20.1271
    Ejector pin
    6,34 x 102 mm
  • 20.1272
    20.1272
    Ejector pin
    7,98 x 118 mm
  • 20.1273
    20.1273
    Ejector pin
    7,98 x 105 mm
  • 20.1283
    20.1283
    Tool holder MT2 without innercooling for Weldon + Nitto/Universal 19mm (3/ ...4")
  • 20.1283
    20.1283
    Tool holder MT2 without innercooling for Weldon + Nitto/Universal 19mm (3/ ...4")
  • 20.1286
    20.1286
    Tool holder MT3 without innercooling for Weldon 32mm (1 1/4")
  • 20.1286
    20.1286
    Tool holder MT3 without innercooling for Weldon 32mm (1 1/4")
  • 20.1287
    20.1287
    Tool holder MT2 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1287
    20.1287
    Tool holder MT2 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1289
    20.1289
    Tool holder MT3 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1289
    20.1289
    Tool holder MT3 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1290
    20.1290
    Tool holder MT3 with innercooling for Weldon 32mm (1.1/4'')
  • 20.1290
    20.1290
    Tool holder MT3 with innercooling for Weldon 32mm (1.1/4'')
  • 20.1291
    20.1291
    Holder MK3 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1291
    20.1291
    Holder MK3 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1292
    20.1292
    Tool holder MT4 with innercooling for Weldon 32mm (1.1/4'')
  • 20.1292
    20.1292
    Tool holder MT4 with innercooling for Weldon 32mm (1.1/4'')
  • 20.1293
    20.1293
    Tool holder MT3 without innercooling for Weldon + Nitto/Universal 19mm (3/ ...4")
  • 20.1293
    20.1293
    Tool holder MT3 without innercooling for Weldon + Nitto/Universal 19mm (3/ ...4")
  • 20.1301
    20.1301
    Tool holder MT2 QUICK-CHANGE without internal cooling for Weldon + Nitto/U ...niversal 19mm (3/4")
  • 20.1301
    20.1301
    Tool holder MT2 QUICK-CHANGE without internal cooling for Weldon + Nitto/U ...niversal 19mm (3/4")
  • 20.1302
    20.1302
    Ejector pin
    6,34 x 130 mm
  • 20.1303
    20.1303
    Tool holder MT2 QUICK-CHANGE with internal cooling for Weldon + Nitto/Univ ...ersal 19mm (3/4")
  • 20.1303
    20.1303
    Tool holder MT2 QUICK-CHANGE with internal cooling for Weldon + Nitto/Univ ...ersal 19mm (3/4")
  • 20.1304
    20.1304
    Ejector pin
    6,34 x 160 mm
  • 20.1307
    20.1307
    Tool holder MT3 QUICK-CHANGE with internal cooling for Weldon + Nitto/Univ ...ersal 19mm (3/4")
  • 20.1307
    20.1307
    Tool holder MT3 QUICK-CHANGE with internal cooling for Weldon + Nitto/Univ ...ersal 19mm (3/4")
  • 20.1308
    20.1308
    Cooling pressure bottle, 1,5 ltr.
  • 20.1310
    20.1310
    Tool holder MT4 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1310
    20.1310
    Tool holder MT4 with innercooling for Weldon + Nitto/Universal 19mm (3/4")
  • 20.1311
    20.1311
    Adapter with bore 6,34 mm:
    Nitto/Universal 19 mm (3/4") -
    Weldon 19 mm (3 .../4")
  • 20.1314
    20.1314
    Adapter with bore 7,98 mm:
    Nitto/Universal 19 mm (3/4") -
    Weldon 19 mm (3 .../4")
  • 20.1318
    20.1318
    Ejector pin
    6,34 x 116 mm
  • 20.1327
    20.1327
    Cooling pressure bottle, 3 ltr.
  • 20.1372
    20.1372
    Fein Quick-In adapter Ø 18 mm
  • 20.1372
    20.1372
    Fein Quick-In adapter Ø 18 mm
  • 20.1375
    20.1375
    Quick release chuck
  • 20.1375
    20.1375
    Quick release chuck
  • 20.1384
    20.1384
    Adapter Weldon 19 mm
  • 20.1384
    20.1384
    Adapter Weldon 19 mm
  • 20.1385
    20.1385
    Adapter for ejector pin , Weldon 19 mm / Fein Quick-In shank
  • 20.1386
    20.1386
    Adapter with bore 7,98mm:
    Weldon 19mm (3/4") -
    Weldon 32mm (1.1/4")
  • 20.1387
    20.1387
    Extension
    50mm, Weldon shank
  • 20.1388
    20.1388
    Ejector Pin
    6,34 x 90 mm
  • 20.1390
    20.1390
    Ejector pin
    7,98 x 6,34 x 5,30 x 140 mm
  • 20.1393
    20.1393
    Ejector pin
    7,98 x 135 mm
  • 20.1396
    20.1396
    Ejector pin
    7,98 x 6,34 x 5,30 x153 mm
  • 20.1399
    20.1399
    Ejector pin
    7,98 x 160 mm
  • 20.1401
    20.1401
    Tool holder morse taper 3, for CNC machines
  • 20.1402
    20.1402
    Extension
    75mm, Weldon shank
  • 20.1403
    20.1403
    Ejector pin
    7,98 x 145 mm
  • 20.1405
    20.1405
    Ejector pin
    7,98 x 6,34 x 5,30 x 165 mm
  • 20.1406
    20.1406
    Extension
    50 mm, Nitto / Universal shank
  • 20.1407
    20.1407
    Extension
    75mm, Nitto / Universal shank
  • 20.1408
    20.1408
    Ejector pin
    7,98 x 167 mm
  • 20.1409
    20.1409
    Extension
    100 mm, Nitto / Universal shank
  • 20.1411
    20.1411
    Ejector pin
    7,98 x 6,34 x 5,30 x 178 mm
  • 20.1414
    20.1414
    Ejector pin
    7,98 x 180 mm
  • 20.1417
    20.1417
    Extension
    100 mm, Weldon
  • 20.1420
    20.1420
    Ejector pin
    7,98 x 6,34 x 5,30 x 190 mm
  • 20.1421
    20.1421
    Adapter with pin
  • 20.1422
    20.1422
    Adapter with pin
  • 20.1423
    20.1423
    Ejector pin
    7,98 x 190 mm
  • 20.1426
    20.1426
    Ejector pin
    7,98 x 6,34 x 5,30 x 203 mm
  • 20.1427
    20.1427
    Ejector pin 2-parts.
    7,98 x 130 mm
  • 20.1428
    20.1428
    Ejector pin 2-parts,
    7,98 x 157 mm
  • 20.1429
    20.1429
    Ejector pin
    7,98 x 205 mm
  • 20.1431
    20.1431
    Adapter with pin
  • 20.1432
    20.1432
    Extension 30 mm
  • 20.1433
    20.1433
    Ejector pin
    7,98 x 6,34 x 5,30 x 127 mm
  • 20.1434
    20.1434
    Adapter with pin
  • 20.1435
    20.1435
    Pin for opening the cooling supply
  • 20.1436
    20.1436
    Ejector pin 2-parts
    7,98 x 157 mm
  • 20.1437
    20.1437
    Tool holder MT3 QUICK-CHANGE without internal cooling for Weldon + Nitto/U ...niversal 19mm (3/4")
  • 20.1437
    20.1437
    Tool holder MT3 QUICK-CHANGE without internal cooling for Weldon + Nitto/U ...niversal 19mm (3/4")
  • 20.1438
    20.1438
    Ejector pin 2-parts
    7,98 x 184 mm
  • 20.1439
    20.1439
    Ejector pin
    7,98 x 130 mm
  • 20.1442
    20.1442
    Adapter Weldon 19 mm [3/4"]
  • 20.1443
    20.1443
    Adapter Fein Quick-In 18 mm
  • 20.1443
    20.1443
    Adapter Fein Quick-In 18 mm
  • 20.1444
    20.1444
    Adapter Nitto/Universal 19 mm [3/4"]
  • 20.1453
    20.1453
    Adapter Weldon 32 mm [1.1/4"]
  • 20.1455
    20.1455
    Spare screw for carbide tipped countersink
  • 20.1458
    20.1458
    Adapter Weldon 32 mm [1.1/4"]
  • 20.1459
    20.1459
    Tool holder with morse tapper 3
  • 20.1469
    20.1469
    Tool holder with morse tapper 4
  • 20.1482
    20.1482
    Ejector pin
    4,74 x 77 mm
  • 20.1485
    20.1485
    Ejector pin
    4,74 x 102 mm
  • 20.1486
    20.1486
    Ejector pin 2-parts,
    7,98 x 168 mm
  • 20.1515
    20.1515
    Morse taper 2
  • 20.1515
    20.1515
    Morse taper 2
  • 20.1523
    20.1523
    Tool holder morse taper 3, for CNC machines
  • 20.1524
    20.1524
    Morse taper 3
  • 20.1524
    20.1524
    Morse taper 3
  • 20.1525
    20.1525
    Chuck
  • 20.1525
    20.1525
    Chuck
  • 20.1797
    20.1797
    Pilot Ø 14 mm
  • 20.1798
    20.1798
    Pilot Ø 18 mm
  • 20.1799
    20.1799
    Pilot Ø 22 mm
  • 20.1800
    20.1800
    Tapping adapter with Weldon shank Ø 19/32 mm
  • 20.1820
    20.1820
    HSSE Co5 TIN coated tap
  • 20.1830
    20.1830
    Adapter Weldon 19 mm [3/4"]
  • 20.1841
    20.1841
    Tool holder ith Morse Taper MT4, without internal cooling
  • 20.1841
    20.1841
    Tool holder ith Morse Taper MT4, without internal cooling
  • 20.1842
    20.1842
    Holder MK2 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1842
    20.1842
    Holder MK2 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1843
    20.1843
    Holder MK4 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1843
    20.1843
    Holder MK4 extra long with cooling for Weldon + Nitto/Universal 19mm (3/4" ...)
  • 20.1844
    20.1844
    Tool holder MT4 without innercooling for Weldon 32mm (1 1/4")
  • 20.1844
    20.1844
    Tool holder MT4 without innercooling for Weldon 32mm (1 1/4")
  • 20.1845
    20.1845
    Holder MK3 extra long with cooling for Weldon 32mm (1 1/4")
  • 20.1845
    20.1845
    Holder MK3 extra long with cooling for Weldon 32mm (1 1/4")
  • 20.1846
    20.1846
    Holder MK4 extra long with cooling for Weldon 32mm (1 1/4")
  • 20.1846
    20.1846
    Holder MK4 extra long with cooling for Weldon 32mm (1 1/4")
  • 20.1860
    20.1860
    Solid carbide drills to remove jammed taps
  • 20.1865
    20.1865
    Solid carbide drills to remove jammed taps -SET
  • 21.0001
    21.0001
    Magnetic stick for chip removal
  • 21.0036
    21.0036
    Tool holder Morse taper 3, for CNC drilling machines
  • 21.0048
    21.0048
    Adapter: Weldon 32mm (1.1/4") to Weldon 19mm (3/4")
  • 21.0051
    21.0051
    Morse taper 4
  • 21.0051
    21.0051
    Morse taper 4
  • 21.1780
    21.1780
    Pilot Ø 15 mm
  • 21.1781
    21.1781
    Pilot Ø 16 mm
  • 21.1782
    21.1782
    Pilot Ø 17 mm
  • 21.1783
    21.1783
    Pilot Ø 19 mm
  • 21.1784
    21.1784
    Pilot Ø 20 mm
  • 21.1785
    21.1785
    Pilot Ø 21 mm
  • 21.1786
    21.1786
    Pilot Ø 23 mm
  • 21.1787
    21.1787
    Pilot Ø 24 mm
  • 21.1788
    21.1788
    Pilot Ø 25 mm
  • 29.6610
    29.6610
    Insert - CVD-Face CXHW 09 T3 PD FR 5
  • 29.6610
    29.6610
    Insert - CVD-Face CXHW 09 T3 PD FR 5
  • 29.6615
    29.6615
    Insert - CVD-Shoulder CXHW 09 T3 PD FR 8
  • 29.6615
    29.6615
    Insert - CVD-Shoulder CXHW 09 T3 PD FR 8
  • 29.6617
    29.6617
    Insert - CVD-Finishing CXHW 09 T3 XX FR
  • 29.6617
    29.6617
    Insert - CVD-Finishing CXHW 09 T3 XX FR
  • 29.6618
    29.6618
    Torx Screw Set T15
  • 29.6618
    29.6618
    Torx Screw Set T15
  • 29.6619-1
    29.6619-1
    Torque screw driver 0,3 - 1,2 Nm, Torx screw T15
  • 29.6619-1
    29.6619-1
    Torque screw driver 0,3 - 1,2 Nm, Torx screw T15
  • 29.6619-2
    29.6619-2
    Torque screw driver 3 Nm, Torx screw T15
  • 29.6619-2
    29.6619-2
    Torque screw driver 3 Nm, Torx screw T15
  • 29.6621
    29.6621
    PCD universal - read cutter
  • 29.6621
    29.6621
    PCD universal - read cutter
  • 29.6622
    29.6622
    ND natural diamond - finishing - acrylic
  • 29.6622
    29.6622
    ND natural diamond - finishing - acrylic
  • 29.6623
    29.6623
    ND - natural diamant - finishing - soft aluminium
  • 29.6623
    29.6623
    ND - natural diamant - finishing - soft aluminium
  • 29.6624
    29.6624
    ND natural diamond - finishing - soft copper
  • 29.6624
    29.6624
    ND natural diamond - finishing - soft copper
  • 29.6625
    29.6625
    ND natural diamond - finishing - TITANIUM
  • 29.6625
    29.6625
    ND natural diamond - finishing - TITANIUM
  • 5.6110
    5.6110
    distance ring for Circular saw blades retainer
  • 5.6111
    5.6111
    Screw nut for circular saw blades retainer
0.87572400 1571801398